HMK® S234
Silicone Impregnator – Extra Stain Protection
Extra oil and grease protection for all natural and artificial stone surfaces. Solvent based. For interior and exterior use. Food hygiene compliant.
HMK® S234 is a special impregnator for all natural and artificial stone, agglomerates and terrazzo. S234 reduces the penetration of water, dirt, oil and grease on all finishes, including polished surfaces. Surfaces treated with S234 remain vapor permeable and will have little to no aesthetic enhancement.
Important: Clean surface thoroughly before treatment using HMK® R155 Intensive Cleaner (diluted) followed by a flood rinse with water and allow at least 24 hours to dry (max residual moisture of 2-4%) before sealing. If under floor heating exists, switch it off and allow the surface to cool to room temperature.
Instructions: Apply HMK® S234 generously and evenly to a chemically clean and dry surface with a natural bristle paint brush or the HMK® Z950-HMK Z951 brushes. Two saturating, wet-on-wet applications are usually sufficient depending on porosity of the stone. Thoroughly remove excess product before drying on the surface. For more absorbent surfaces additional applications may be required. Subsequent applications may be done within fifteen minutes of the initial application, but it is best to wait 24 hours between applications to best determine saturation level. Smears or imperfections left after the application process can be removed using a soft clean cloth moistened with S234 or pure mineral spirits and buffing. It is possible to use HMK® S234 in an airless sprayer for use on vertical surfaces.
Do not walk on the treated surface until 2-4 hours after treatment is completed. Resistance to oil and water is developed over 48 hours. Protect surface from rain and humidity for 12 hours. Do not apply to rubber, plastics, lacquered or varnished surfaces and solvent intolerant materials. Remove all foodstuffs from the area to be treated before work is commenced. Once dry the residual material is not harmful to health. For regular cleaning and continued protection use HMK® P324 Liquid Stone Soap.
Description : SILICONE IMPREGNATOR (* all surfaces for interior & exterior use)
Unit Size : Available in 1 Liter , 5 Liter or 10 Liter
Unit / Case : 30 , 12 , 2 ,2
Coverage (per unit): 25-35 sq ft , 75-150 sq ft (depending on finish) , 375-750 sq ft (depending on finish) , 750-1500 sq ft (depending on finish)
Coverage: About 50 to 220 square feet per liter depending on the nature of the surface.
Warning: Chemical product. Contains turpentine substitute. Flammable. Keep away from heat, sparks and flame. Harmful or fatal if swallowed or inhaled. Ensure the area to be treated is adequately ventilated. Avoid eye/skin contact. If exposed wash/flush with water and seek medical attention immediately. Keep out of the reach of children. See Material Safety Data Sheet for more detailed information. Do not use the product in temperatures below 50 and above 80°F.
Packaging: 12 x 1L tins per box; 2 x 5L tins per box; 2 x 10L tins per box.
Storage: Store in a cool place and keep lid tightly closed.
Testing: Always test the product in an inconspicuous area to evaluate suitability, coverage and performance.
Limitation of liability: Except where prohibited by law, HMK® Moeller Stone Care and/or HMK Stone Care USA will not be liable for defective products and any loss or damage arising from HMK® Moeller Stone Care product, weather direct, special, indirect or consequential, regardless of legal theory asserted. No other warranty or representation is made or implied.
